Flat Panel Cover-Up - Custom Sizes - white Plastic HIS, textured, non-insulated

Custom Size Cover-Up, High Impact Styrene Plastic, non-insulated

Description:

Cover-UP Flat Panels provide access for any maintenance, repair, or service job. The Cover-UP Flat Panel is a single piece of high impact styrene plastic board, slightly textured, cut to your selected dimensions, beveled in the front for a smooth transition from panel to wall or ceiling. Quick, easy, and attractive, Cover-Up installs in less than 10 minutes- and these are just a few of the reasons Cover-Up should be your choice for any access need.

IMPORTANT:
CHOOSE COVER SIZE AT LEAST 2" LARGER THAN YOUR OPENING (W + 2" OR GREATER, H + 2" OR GREATER)! SEE FORMULA BELOW

Your order size is always at minimum your opening width + 2" by opening height + 2". The order size refeflects the actual, final panel size. So if your opening is 14" x 16" you would order a 16" x 18" panel. If your opening is an odd size please round up to the next even size and add 2" to the measurement. You can then indicated in the notes at checkout to cut to custom size (minimum would be 1/2" steps). So if your openign is 15.5" x 19" you would rund to the next even size (16" x 20") and then add 2" to each measurement - so 18" x 22" would be your order size. This will for sure cover your 15.5" x 19" opening. You could indicate at checkout to cut the panel to 17.5" x 21" if you so choose. Please keep in mind that all panels are made-to-order and are excluded from restocking/return/exchange.

The Custom Flat Panel Cover-Up comes with fasteners (standard wall anchors and screws, heads painted white to match panel) and may be installed without any framing. The Cover-Up may be painted or wallpapered to match any decor. Ideal for both new construction and remodeling, we are sure that you will find the quality and appearance of the Cover-Up will help you provide a professional finish to any access project.

NOTE: If you are not sure what you are ordering or if you are not clear regarding the size needed please contact us prior to placing your order. Each cover up panel is custom cut for you to your size specification and is thereby excluded from returns or exchanges.

Cover-Up without Insulation -Illustration

click to enlarge

Features:

• Material: High Impact Styrene Plastic
• Edges: Beveled
• Color: White
• Framing: Not Required
• Insulation: N/A
• Finish: Textured and paintable
• Mounting Hardware: standard wall anchors and screws, heads painted white, included; please note that the amount of holes and screws may vary by size of the panel. One mounting hole in each corner is standard. Additional holes may be placed along the perimeter of the panel by the manufacturer to insure tight fit between panel and wall/ceiling.

Applications:

Access to:	Repairs to:
Jacuzzis Whirlpools & Spas Tub/Shower Fittings/Valves Behind washing machine	Water/Gas Line Wall Hydrant Electrical Waste Line

Measurements:

Door should not be installed near any existing/potential heat source or open flame. As with any building product you should consult local building/fire codes. * Custom Flat Panel Cover-Up (without insulation) has a 36 hour minimum lead time ** The weight of the cover-up is dependend on the size of the cover up. All shipping cost is estimated and will be adjusted to actual cost.